250 Watts per channel into 8 Ohms (24dBW), 400 Watts
per channel into 4 Ohms
Peak-to-peak
output current
75 Amps
Damping factor
140
Output devices
per channel
4
Pre-output impedance
50 Ohms
LINE INPUTS
Total harmonic distortion
+ noise 20Hz to 20KHz
< 0.01%
Signal / noise ratio
> 100dB 'A'-weighted
Input sensitivity for
250 Watts into 8 Ohms
330mV
Input impedance
220k Ohms
Overload margin
26dB
Channel separation
> 70dB typical
Frequency response
20Hz to 20kHz, +0, -0.2dB
HOME THEATRE
DIRECT INPUT
Input sensitivity
30dB gain (31.5 times) nominal
PHONO INPUT
Frequency
response
Reference IEC
RIAA
IEC RIAA - see graph below
Signal / noise
ratio
> 96dB 'A'-weighted
Input sensitivity
2.5mV (moving magnet)
Input impedance
47k Ohms
Overload margin
24dB
Inputs
4 pairs line level RCA connectors.
1 pair (Home Theatre) direct power amplifier
input RCA connectors.
1 pair phono (moving magnet) RCA connectors.
Power
requirement
100 / 115 / 230Volts AC 50
/ 60Hz (factory pre-set),
700 Watts maximum into 8 Ohms, 35 Watts
idle
Outputs
2 amplifier channels via 1
pair per channel binding posts.
1 pair RCA audio outputs controlled by the
volume.
1 pair RCA tape record fixed line level
output.
Weight
16.6 kg, 36.6 lbs unit only,
unboxed
19.1 kg, 42.1 lbs in shipping carton
Dimensions
440 mm, 17.3 inches wide
125 mm, 4.9 inches high including feet
400 mm, 15.75 inches deep including terminals
Standard
accessories
IEC type mains lead (10-Amp
type),
remote control (A5, universal type),
2 batteries size LR03 or AAA, manganese
alkaline type
