OUTPUT
|
|
Output voltage.
RMS peak |
45 Volts 20Hz to 20 KHz 127 Volts |
| Power output |
250
Watts into 8 Ohms (24dBW).
450 Watts into 4 Ohms |
Peak-to-peak
output current |
72
Amps |
| Damping factor |
180 |
Output devices
per channel |
Six |
Total Harmonic
Distortion + noise |
0.006%
at 1kHz up to 90% power, into 4 or 8 Ohms |
Intermodulation
distortion |
0.004%
at 12.5 Watts into 8 Ohms |
Frequency response
|
20Hz
to 20kHz ±0dB
10Hz to 100kHz +0 / -1.5dB |
Audio gain
|
30dB
(31.5 times) nominal |
| Input impedance |
31K
Ohm |
| Input sensitivity
for full power output into 8 Ohms |
1.42
Volts |
Signal / noise ratio,
reference full
power output |
>
115dB 'A'- weighted |
| Input |
One
RCA connector |
| Outputs |
One
amplifier channel via two pairs of speaker binding
posts. One RCA loop output socket. |
Power requirements
|
100/115/230V AC, 50/60Hz (factory preset). 1000 Watts
maximum into 8 Ohms load. 70 Watts idle. |
| Dimensions |
192
mm (7.6 inches) wide.
125 mm (4.9 inches) high
including feet.
460 mm (18.1 inches) deep
including terminals. |
| Weight |
12
kg (26.4 lbs) unit only, unboxed. 14 kg (30.8
lbs) in shipping carton. |
| Standard accessories |
IEC
type mains lead. |
