Серия TRI-VISTA

OUTPUT   Voltage RMS 53 Volts 20Hz to 20kHz Peak 150 Volts Power 350 Watts per channel into 8 Ohms (25.5dBW), 600 Watts per channel into 4 Ohms Peak-to-peak output current 96 Amps Damping Factor 210 Output devices per channel 8 Pre-output impedance 50 Ohms     LINE INPUTS   Harmonic distortionat 1kHz < 0.002% up to 90% power into 4 or 8 Ohms Total harmonic distortion + noise,20Hz to 20kHz < 0.007% Signal / noise ratio >102dB ‘A’-weighted Input sensitivity for 350 Watts into 8 Ohms 330mV Input impedance 220K Ohms Overload margin 36dB Channel separation >70dB 20Hz to 20kHz Frequency response 20Hz to 60kHz, +0, -1.2dB     PHONO INPUT   Frequency response reference IEC RIAA See Graph below Signal / noise ratio > 96dB ‘A’-weighted Input sensitivity 2.5mV (moving magnet) Input impedance 47k Ohms Overload margin 29dB Power Requirement 100 / 115 / 230VoltsAC 50 / 60Hz (factory pre-set),1200 Watts maximum into 8 Ohms,104 Watts idle Inputs 5 pairs line level RCA connectors,1 pair phono (moving magnet) RCAconnectors Outputs 2 amplifier channels via 2 pairsper channel binding posts.1 pair RCA audio pre-outputscontrolled by the volume setting Weight main unit: 30 kg, 66.1 lbs unit only, unboxed 35 kg, 77.2 lbs in shipping carton P.S.U: 16 kg, 35.3 lbs unit only, unboxed 19 kg, 41.9 lbs in shipping carton Dimensions main 483 mm, 19 inches wide unit: 167 mm, 6.6 inches high including feet 480 mm, 18.9 inches deep including terminals P.S.U: 364 mm, 14.4 inches wide167 mm, 6.6 inches high including feet 480 mm, 18.9 inches deep including terminals Standard Accessories IEC type mains lead, Power supply leads, main (two) Power supply lead for pre-amplifier Remote control (Tri-Vista type) Two batteries (type SUM-4, AAA, LR03)

UPSAMPLING 24 BIT SUPER AUDIO COMPACT DISC PLAYER DAC architecture  24 bit Delta-Sigma (Bitstream) Dual differential 8x oversampling Disc mechanism Philips Upsampling 192kHz Analog output impedance 50 Ohms     SACD   Frequency response 10Hz to 20kHz ref. 1kHz +0 / -0.1dB 10Hz to 30kHz ref. 1kHz +0 / -0.3dB 10Hz to 40kHz ref. 1kHz +0 / -1.6dB 10Hz to 50kHz ref. 1kHz +0 / -4.8dB Signal / noise ratio(digital mute) > 110dB ’A’ weighted Total harmonic distortion < 0.001% at 1kHz Channel separation > 98dB 10Hz to 20kHz Linearity error, 1kHz 0dB at -100dB, 0.2dB at -110dB Audio output at digital 0dB level 2.4VRMS at 1kHz nominal     CD OR EXTERNAL DIGITAL INPUT   Frequency response, 10Hz to 20kHz ref.1kHz +0 / -0.05dB Signal / noise ratio > 110dB "A" weighted Total harmonic distortion < 0.002% 10Hz to 20kHz Channel separation > 90dB 10Hz to 20kHz Linearity error, 1kHz 0dB at -80dB, 0.7dB at -90dB Audio output atdigital 0dB level 2.35VRMS at 1kHz nominal Jitter 150pS Power requirement 100 / 115 / 230Volts AC 50 / 60Hz(factory pre-set), 50 Watts Digital inputs 1 optical (Toslink),1 S/PDIF (RCA connector) Outputs Analog: 1 pair RCA connectors Digital: 1 optical (Toslink),1 S/PDIF (RCA connector) Weight 23 kg, 51.5 lbs unit only, unboxed 25 kg, 56 lbs in shipping carton Dimensions 480 mm, 18.9 inches wide 165 mm, 6.5 inches high including feet 380 mm, 15 inches deep including Standard Accessories IEC type mains lead (16 Amp type), Remote control (Tri-Vista type), Two batteries (type SUM-4, AAA, LR03)

   Новости   Продукция   Статьи   О компании   Ссылки